MyChron4 660
User Manual
Release 1.03
www.aim-sportline.com
15
The Keyboard is composed of four rubber push-buttons and is used to turn the
gauge ON and OFF, configure the system, recall recorded data from memory and
to clear the internal memory.
The four push-buttons are used to perform the following functions :
MENU/<<
Used to enter configuration mode, to switch to the previous
configuration option and to turn on backlight during a test.
>>/OFF
Used to switch to the next configuration option, to enter Check
mode and to switch the gauge OFF
MEM / OK
Used to CONFIRM a configuration and to retrieve recorded data.
ON/VIEW
Used to switch ON the gauge, to exit configuration menu, or to
switch the display from “RPM digital value” to “Current time”.
2.2 – How to switch ON/OFF the gauge
If you wish to
switch ON
the gauge, press button
ON/VIEW
, if you wish to switch
it
OFF
, keep
>>/OFF
pressed.
Your
MyChron4 660
has an automatic power down feature that turns the power
off after 10 minutes of inactivity.
To run the system in DEMO MODE, switch it on by pressing button
ON/VIEW, then hold down MENU/<< and >>/OFF buttons for a couple of
seconds.
Summary of Contents for MYCHRON4 660
Page 1: ...USER MANUAL...
