LCU-ONE Analog
User Manual
Release 1.02
Afterwards it is possible to work on the other parameters.
“Use: Lambda/AFR” these buttons allow the user to decide whether showing Lambda
values or AFR (Stoichiometric) ones. The appearance of the panel below depends on
this choice; here down are the panels showing Lambda values (left) or AFR (right).
The coloured button placed on the left of the cases indicates the colour of this value on
the central graph. In the example the value is showed in light blue.
Once decided which values to show, just fill in the cases.
When all the values have been inserted the configuration has to be transmitted to
LCU-
ONE Analog
pressing “Transmit lambda configuration” button, placed in the left
keyboard.
The system will show a confirmation message. In case
LCU-ONE Analog
-PC
connection is not ok the system shows an error message (right figure).
www.aim-sportline.com
10
