HYDRA EMS NEMESIS 2.5 -2.6 ECUs Connections
ECU Technical documentation
Release 1.01
1
www.aim-sportline.com
INTRODUCTION
AIM has developed special applications for many of the most popular ECUs: by special
applications we mean user-friendly systems which allow to easily connect your ECU to our
high tech data loggers: user needs only to install harness between the
logger
and the
ECU.
Once connected, the logger displays (and/or records, depending on the logger and on the
ECU data stream and configuration) values like RPM, engine load, throttle position (TPS),
air and water temperatures, battery voltage, speed, gear, lambda value (air/fuel ratio)
analog channels…
All AIM loggers include – free of charge –
Race Studio 2
software, a powerful tool to
configure the system and analyze recorded data on your PC.
Warning: once the ECU is connected to the logger, it is necessary to set it in the
logger configuration in Race Studio 2 software:
Select Manufacturer “HYDRA_EMS ” Model “Nemesis 2.5” or
Manufacturer “HYDRA_EMS” Model “Nemesis 2.6”.
Refer to Race Studio Configuration user manual for further information concerning
the loggers configuration.
Warning: it is always suggested to verify if the ECU needs any software/firmware
setting or upgrade to export data to an external logger.
