![background image](http://html.mh-extra.com/html/aim/evo5/evo5_user-manual_2871803002.webp)
Thanks.
Dear Customer,
First, we would like to thank you for
choosing the EVO5 logger as the tool for
improving your racing craft setup and
ontrack performance.
EVO5 is an expandable new generation
logger with high sampling capabilities,
recording data from a variety of sensors
and sources.
Please, before digging into your new data
system, keep in mind that we are
constantly working on bettering our
software and firmware.
So, be sure to check our website
periodically for any updates.
www.aim-sportline.com
02
03
04
06
08
10
11
12
12
12
14
14
14
14
15
16
18
20
25
28
30
31
34
35
36
40
41
42
43
44
45
46
47
47
48
49
50
50
52
54
54
54
55
56
58
EVO5 Logger
01 – Introduction
02 – What is in the kit
03 – Layout and pushbuttons
04 – RGB LED
05 – ECU connection and CAN resistors
06 – RPM
6.1 – RPM from ECU
6.2 – RPM via a 5-50 V square wave signal or coil (150-400V)
07 – Speed
7.1 – Speed read from the ECU
7.2 – Speed read from the GPS receiver
7.3 – Speed read from wheel sensor
08 – Analog inputs
09 – Digital outputs
10 – WiFi configuration
10.1 – Configuring your device as an AP
10.2 – Joining your AiM system to an existing network
10.3 – High performance WLAN setup
10.4 – About Internet connectivity
10.5 – Working with Mac(
TM
) OS and Virtualized Windows (
TM
)
11 – Race Studio 3 software
11.1 Configuration
11.1.1 – Channels configuration
11.1.2 – ECU Stream and CAN resistor configuration
11.1.3 – CAN2 Stream
11.1.4 – Math Channels
11.1.5 – Parameters
11.1.6 – Output Signals
11.1.7 – CAN Output
11.2 – Modify or delete an existing configuration
11.3 – Connect your AiM system to a PC
11.3.1 – Configuration transmission
11.3.2 – Live Measures and calibration
11.3.3 – Data download
12 – GPS and track management
12.1 – Tracks feature
12.2 – Tracks collections
12.3 – How to modify track data in the PC database
12.4 – How to delete a track from the PC database
12.5 – How to transmit track information to EVO5
13 – Expansions
14 – EVO5 Pinout
15 – Technical drawings