| 4
OPERATING INSTRUCTIONS - CONTINUED
3. Alarm type selection:
This machine preset has 5 kinds of chord
sound alarm and timing FM function (alarm 6) to choose from, through
the “+” or “-” key in order or reverse order to choose, when the
selection of the corresponding ringtone horn will have a pre-listening
effect, the default program is 01. Select OK and press M to enter the
next setting.
4. Alarm ON/OFF:
“ON” or “OFF” of the alarm can be selected by “+”
or “-” key. When “ON” is selected, the pattern of the corresponding
alarm clock 1 or 2 will light up after exiting the setting to show that the
alarm clock is set successfully. When selecting “OFF”, the corresponding
alarm clock icon is not lit. After setting OK, press M to enter the
next setting.
5. Alarm cycle setting:
the “+” or “-” key can be used to select the
cycle of the alarm to ring for ONE day (ONE) or ALL day (ALL).
When “ONE” is selected, the alarm will ring for 30 seconds when
the clock reaches the time of the timer alarm, and the alarm will
automatically exit after 30 seconds when there is no operation. When
you choose “ALL”, ring a bell at a certain time each day.
6. After the above steps are performed in sequence, press the M key
to confirm or pause for 3 seconds, and the default setting will be
automatically completed and returned to the home screen.
APPLICATION OF SNOOZE BUTTON:
1. One-button SNOOZE setting:
When the alarm goes off, press
SNOOZE to enter SNOOZE mode for one time (or press any other
button to end the SNOOZE mode). Five minutes later, the alarm will
ring again.
2. Brightness adjustment of the display:
In any picture, press the
“SNOOZE” button to highlight the first time, highlight the second time,
highlight the third time and so on. When there is no key operation for
15 seconds, the machine will enter automatically and keep the
general display.
3. Set the clock alarm clock to zero:
when the time is displayed on the
main interface, press the “SNOOZE” button for a long time for
5 seconds to enter the restore factory setting program, and everything
is set to zero.
Summary of Contents for CR1009W
Page 12: ......
