| 6
BEFORE USING YOUR KETTLE
USAGE INSTRUCTIONS
If you are using the Kettle for the first time, it is recommended that you should
clean your Kettle before use by boiling the maximum capacity of water once
and then discard the water. Wipe the surface with damp cloth.
Note:
The maximum capacity of kettle is 1.7 L.
1.
Place the Base on the level surface.
2.
To fill the Kettle, remove it from the Base and open the lid
by pressing the Lid Release Button, fill with the desired amount of
water, and then close the Lid. Alternatively, the Kettle may be
filled through the spout. The water level should not exceed maximum
marks or sit below minimum level. Too little water will cause the Kettle
to be switched off before the water has boiled.
Note:
Do not fill the water over the maximum level, as water may
spill out of the spout when boiling. Ensure that the lid is firmly in
place before plugging into the power outlet.
3.
Position the Kettle on the Base.
4.
Connect the plug into an electrical supply socket. Press down the on
/ off Switch, the indicator will light up. Then the kettle will start to
boil the water, once the water has been boiled, the on / off Switch
will be switched off automatically. You can turn off the power by
lifting the on / off Switch at any moment during boiling water cycle.
If you want to boil water again, press down the on / off Switch
directly to restart the Kettle.
Note:
Ensure that the on / off Switch is free of obstructions and
the lid is firmly closed, the kettle will not turn off if the switch is
constrained or if the lid is slightly open.
