![background image](http://html1.mh-extra.com/html/aim/ashp2/ashp2_user-manual_2871744005.webp)
5 |
OPERATION INSTRUCTION
MAINTENANCE AND CLEANING
Before using:
1.
Place the Hotplate on a level surface.
2.
Plug your Hotplate into the electrical power supply.
3.
Place the pots you are going to use onto the plate you intend to use.
Note:
a)
The base of the pot must be the same size as the plate of
the
Hotplate.
b)
Do not put a pot/pan that has a larger base on the plate of
the
Hotplate.
c)
Do not put a pot/pan that has a smaller base on the plate of
the
Hotplate.
d)
Ensure the base of the pot/pan is flat and not concave.
4.
Turn the Left or Right Temperature Controller to turn on either the
Left or Right Hotplate.
5.
The Left Temperature Controller controls the heat of the
Left Hotplate.
6.
The Right Temperature Controller controls the heat of the
Right Hotplate.
Note:
a)
Do not overfill the pot/pan as it can boil over which is a
burn
risk.
b)
The Hotplate will stay warm once it has been turned off so
do not touch the Hotplate.
1.
After using the Hotplate, set all Temperature Controllers to the
“OFF” position.
2.
Make sure the Hotplate has cooled down to room temperature and
wipe the Hotplate surfaces and with a damp cloth or a sponge.
DO NOT IMMERSE THIS HOTPLATE IN ANY LIQUID.
3.
Do not use any chemical, steel, wooden or abrasive cleaners to clen
the Hotplate.
Summary of Contents for ASHP2
Page 8: ......