![background image](http://html.mh-extra.com/html/aim/11-fin/11-fin_user-manual_2871779006.webp)
| 6
ASSEMBLY INSTRUCTIONS
The heater is packaged with the feet unattached. You must attach them
before operating the heater.
WARNING:
DO NOT operate without feet attached. Only operate the
heater in the upright position (feet on the bottom, controls on the top),
any other position could create a hazardous situation.
MOUNTING
Take the heater and all the parts from the packing carton.
1. Stand the heater on its head.
2. Place the footplate on the top of both radiation fins.
3. Secure the footplate on the warmer with specified U type bolt and
wing nuts.
4. Tighten the screw.
5. Turn the heater over so it stands on the wheels.
6. Once the wheels are assembled and the Heater is placed in the
correct upright position, allow the oil to settle for a few minutes
before switching the unit on. This will allow the oil to completely coat
the heating element.