6
Pulse and Pulse Train
Output Level:
2.5mV to 10Vp
−
p into 50
Ω
Rise and Fall Times:
<25ns
Period:
Range:
100ns to 100s
Resolution:
4
−
digit
Accuracy:
±1 digit of setting
Delay:
Range:
Resolution:
−
99·99s to + 99·99s
0·002% of period or 25ns, whichever is greater
Width:
Range:
Resolution:
25ns to 99·99s
0·002% of period or 25ns, whichever is greater
Note that the pulse width and absolute value of the delay may not exceed the pulse period at any
time.
Pulse trains of up to 10 pulses may be specified, each pulse having independently defined width,
delay and level. The baseline voltage is separately defined and the sequence repetition rate is
set by the pulse train period.
Arbitrary
Up to 100 user defined waveforms may be stored in the 256K point non
−
volatile RAM.
Waveforms can be defined by front panel editing controls or by downloading of waveform data
via RS232 or GPIB.
Waveform Memory Size:
64k points per channel. Maximum waveform size is 64k points,
minimum waveform size is 4 points
Vertical Resolution:
12 bits
Sample Clock Range:
100mHz to 40MHz
Resolution:
4 digits
Accuracy:
± 1 digit of setting
Sequence
Up to 16 waveforms may be linked. Each waveform can have a loop count of up to 32,768.
A sequence of waveforms can be looped up to 1,048,575 times or run continuously.
Output Filter
Selectable between 16MHz Elliptic, 10MHz Elliptic, 10MHz Bessel or none.
