System Setup
1.6 HDCD(High Definition Compatible digital)
HDCD (High Definition Compatible digital) is a patented encode/decode process for
delivering the full richness and details of the sound from HDCD-encoded CDs.
Set the digital filter to
2x
,
1x
or
off
.
1.7 LAST MEMORY
ON
: During a playback or in the paused/stopped status each time you open the disc tray
or turn off the player, the unit will memorize the last playback time. Next time when you
insert the same disc and close the disc tray to load the disc, the unit will play from the
memorized point.
OFF
: Disable the last memory function.
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT:
The 5.1-channel audio is mixed into left channel and right channel and is output
via the FL and FR speakers respectively.
STEREO:
The 5.1-channel audio is mixed into stereo signal and is output via the FL and
FR speakers.
5.1CH:
Turn off the DOWNMIX mode. If the unit is connected to 5.1-channel amplifier,
this item should be selected.
NOTE:
This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.1.2 FRONT, CENTER, REAR SPEAKER and SUBWOOFER
Only when the DOWNMIX mode is turned off (
DOWNMIX
is set to
5.1CH
) are the
CENTER SPEAKER
and
REAR SPEAKER
activated. The
FRONT SPEAKER
can be
set to
LARGE
or
SMALL
. The
CENTER
SPEAKER
,
REAR
SPEAKER
can be set to
LARGE
,
SMALL
or
OFF
and the
SUBWOOFER
can be set to
ON
or
OFF
.
NOTE:
If the speaker is set to
LARGE
, the output level will be higher than that of
SMALL
.
If the speaker is set to
SMALL
, the output level will be lower than that of
LARGE
.
If a speaker is set to
OFF
, no audio is output from it.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
SPDIF OFF:
There will be no digital audio signal output. (Coaxial off)
SPDIF/RAW:
The digital audio signal output will be in its raw format.
SPDIF/PCM:
The digital audio signal output will be in PCM format.
3 DOLBY DIGITAL SETUP
3.1 DUAL MONO
STEREO:
The player outputs the left-channel audio and right-channel audio via the FL
and FR speaker respectively.
L-MONO:
The player outputs the left-channel audio only via both the FL and FR speaker.
R- MONO:
The player outputs the right-channel audio only via both the FL and FR
speaker.
MIX- MONO:
The player outputs the average signal of the left-channel and right-
channel audio via the FL speaker and the FR speaker
NOTE:
This function only applies to the Dolby AC -3 encoded 2-channel discs.
-10-
Summary of Contents for DP709
Page 1: ...DVD Player with Game Controller DP709 User Manual...
Page 23: ......
