Page 5 of 7
a) Place the device on a stable and heat-resistant surface
b) Twist off the tank
c) Supply tap water or demineralized water. The water tank capacity is 1.2
liters. Fill the water tank with 800-900 ml and be careful about not filling it
too much. If some water comes out or if the water tank is too full, empty
slightly the tank and dry well the device.
d) Insert the plug in the wall outlet and turn on switch.
e) Wait until the indicator of boiler operating will light on.
f) Turn on the iron pressing the iron turning on/off button which will light on;
the iron operating light indicator will also light on.
g) Adjust the temperature dial in terms of choose the kind of fabrics that you
want to iron.
Note: If you want to use the steam ironing, we suggest you to adjust the
temperature dial on MAX.
When the iron operating light indicator goes out the device will be ready
for use.
Note: During the whole operating time, the iron operating light indicator
will go on and off in erratic intervals, this is normal.
h) Adjust the steam jet turning the steam temperature dial.
To make the steam jet come out, press the steam button.
To obtain a continuous steam jet, operate on the continuous steam lever.
If the steam stops coming out, this is probably because there is no more
water in the tank. In order to continue ironing, follow the instructions of the
paragraph “SUPPLYING WATER WHILE OPERATING”
SUPPLYING WATER WHILE OPERATING
The filling aperture can not be released during use. The water refilling
aperture can only be released 30 minutes after the appliance is unplugged.
Steaming Fabrics
Follow the “INSTRUCTIONS” from (a) to (h)
Place the iron vertically at a minimum distance of 20-30cm from curtains or
fabrics, and press the steam button, then steam the fabrics describing round
figures.
Note: be very careful about the compatibility of the cloth label with this kind of
treatment.
It with Super-large capacity water tanks and can be used for long time. The
ironing will send a reminder sound when out of water (this sound will stop till after 30
seconds), you can pull out the water tanks easily and full it very conveniently.
Dry Ironing (without steam)
a) Place the device on a stable and heat-resistant surface
b) Turn on the iron, pressing the iron turning on/off button which will light on,
the iron operating light indicator will also light on.
c) Adjust the temperature dial in terms of the kind of fabrics that you want to
iron.
d) When the iron operating light indicator goes out, the iron will be ready for
use
CLEANING AND MAINTENANCE
After unplugging the device from the wall outlet, let it completely cool down
and then clean it with a damp cloth. Don’t use any detergents, but only a soft
Summary of Contents for 8433325500443
Page 7: ...Page 7 of 7...
