Page 4 of 7
Using non-original accessories may prejudice the functionality of the device and
causes the loss of the guarantee.
The appliance must not be left unattended while it is connected to the supply
mains.
When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable
The iron is not to be used if it has been dropped, if there are visible signs of
damage or if it is leaking
The filling aperture must not be opened during use.
The iron must be used and rested on a flat, stable surface.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT
-While operating, the iron and the boiler reach very high temperatures, be very
careful, burns danger. Don’t touch the metal parts of the iron when it is hot.
-Before replacing or cleaning, unplug the device from the power supply outlet and
wait until it has completely cooled down.
-
Don’t use the device outdoors.
-
Don’t use the device close to curtains, furniture or other inflammable objects.
-Caution: the steam is very hot, burns danger. Never direct the steam jet towards
persons, animals or objects that could be damaged or burned.
-Use only tap water or demineralized water to fill the boiler. Other liquids could
damage components and gaskets causing the loss of the guarantee of the product.
Don’t fill the boiler with too much water.
-
Don’t put other liquids or other materials or additives in the boiler.
-
If the cap doesn’t open easily, don’t try to open it.
-
Always place the iron on a stable, flat and heat-resistant surface.
-
Don’t load weights on the mono tube nor try to squash it.
-
Don’t wind the cable around the device.
-Check carefully that the label of the fabric to iron matches the setting and the
temperature of the iron.
-
Always place the iron on its seat on the boiler, don’t let the iron put on fabrics or
elsewhere.
INSTALLATION
Take the device out of the box and remove the packing. In order to ensure sufficient
ventilation, the distance between iron and the wall or other objects should be at
least of 15cm on the back and of 15cm on the side.
Summary of Contents for 8433325500443
Page 7: ...Page 7 of 7...
