5.3 Camera/Lens Installation
1. If the installation requires that the camera be mounted horizontal-
ly to a wall, remove the camera bracket from the mounting system
and install the alternate camera bracket provided in the hardware
kit.
See figure 5
.
Figure 10: Camera Mounted with Alternate Bracket to a Wall
Figure 9: Camera and Mount System
Figure 8: Camera Mounts
3. Secure the camera to the mount using the _-20 x _ inch but-
ton-head flange screw provided in the hardware kit.
See fig-
ures 8, 9 and 10
.
Figure 7: Securing the Mount System with Alternate Bracket
Figure 6: Installing the Mount System
2. Reattach the camera mounting system to the top panel using the
same hardware that was removed in step 5 of section 5.1. Use
either of the two studs near the center of the panel, depending on
the camera / lens size.
See figures 6 and 7
.
Figure 5: Alternate Camera Mount
Studs
Spacer
Washer
Bushing
Flange Nut
Mounting System
Camera
