Aierke KeyControl 49, Manual

Page: 12 / 19

Installation
You can connect keyboard to PC via the USB cable. The System would install the driver automatically. A new
MIDI device called USB Audio Device will be available in your MIDI compatible applications. You can connect
keyboard to other devices such as a sound module to transport MIDI data via MIDI output port. It can also
be power by an optional 12V DC power supply.
Functions
1. KEYBOARD MULTI-FUNCTION
Press the EDIT button to enter/exit the KEYBOARD MULTI-FUNCTIONmode. Press the corresponding
Function key to select the function you want. Use the NUMERIC keys to enter the parameter value,
if it is needed. Use the CLEAN key to set the parameter value to 0, if it is needed. Press the ENTER
key to confirm the operation, if it is needed.
2. ASSIGN CONTROLLERS
To assign parameter to any SLIDER, PEDAL, WHEELS,
▲
/
▼
BUTTONS or KNOBS, please enter the
KEYBOARD MULTI-FUNCTION mode, then press ASSIGN key to enter controller assignment
function, LED shows CHO. Now move the controller that you want to assign (For example, i f you
want to assign SLIDER, move the SLIDER), the LED shows the currently controller number of the
selected controller, input the desired parameter with NUMERIC keys, then press ENTER to confirm
3. PROGRAM
This function would adjust the voice of current channel. When Bank MSB/Bank LSB is 0, only
Program Change message would be send. While Bank MSB/Bank LSB is not 0, Bank MSB, Bank LSB
and Program Change message would be send together. By default, A1 is assigned to preset #154-
PROGRAM, you can use A1 to adjust it.
Also you can use the MULTI-FUNCTION to adjust it.
4. BANK MSB/LSB
These functions are used to select the sound bank. Also you can use the MULTI-FUNCTION to adjust
it.
5. MIDI CHANNEL
The SLIDER, PEDAL, WHEELS,
▲
/
▼
BUTTONS and KETBOARD use the same midi channel as Global
Channel. The KNOBS can be assigned to the Global Channel Or independent Channel. Also you can
use the KEYBOARD MULTI-FUNCTION to adjust it. To assign channel to the KNOBS, please enter the
KEYBOARD MULTI-FUNCTION mode, then press CHANNEL key to enter channel assignment unction.
Now move the KNOBS that you want to assign,input the desired channel number with NUMERIC
Keys, and press ENTER to confirm. The range is 0-16. 0 is to use the Global Channel, and 1-16 is to
set an independent Channel.
6. TRANSPOSE
This function al lows the keyboard to change the pitch up/down by semi-tone. By default, you can
hold EDIT and press
▲
/
▼
BUTTONS to adjust it.Adjustment range is +/- 12 semitones.
By default, you can hold EDIT and press
▲
/
▼
BUTTONS at the same time to set it to initial 0.
7. OCTAVE
This function al lows the keyboard to change the pitch up/down by octave. By default,
▲
/
▼
BUTTONS are assigned to preset #156-OCTAVE,you can use
▲
/
▼
BUTTONS to adjust it.
Adjustment range is +/- 3 octaves.By defaul t , you can press
▲
/
▼
BUTTONS at the same t ime to
set i t to initial 0.