Fixing and Maintenance Instructions
4
REISSUE
If you reissue or are about to reissue this product then please check all components for safety and in
particular tighten all the nuts and bolts, that the chair is steady, no rips or splits in the upholstery, and
that the ‘E’ clips are fitted correctly.
CLEANING
A useful guide to decontamination is MHRA leaflet DB2003(06).
Do not
use abrasive cleaners as this could damage the surface of the equipment. For cleaning, wipe with
a clean cloth soaked in detergent solution and wring out. Depending on the detergent manufacturer’s
instructions, the solution may be heated.
•
Wipe all surfaces of the equipment and the cloth should be re-immersed periodically and the
detergent changed frequently. The detergent should be rinsed or wiped off using a clean cloth
immersed in clean water and wrung out.
•
To disinfect, make sure the equipment has been cleaned and dried and then wipe over with a clean
cloth and a compatible liquid disinfectant. After disinfecting, clean with clean water and dry.
•
When using detergent or disinfectants, please refer to manufacturers’ instructions, and if unsure,
please consult your local Infection Control Specialist for advice.
•
This product is not suitable for cleaning with moist heat or autoclaving.
ADJUSTING SEAT & BACK POSITION
The back and seat can be adjusted to suit the user’s requirements. Simply unscrew the 2x thumb wheels
(
M
) (
fig. 5 or fig. 6
), reposition the back of seat as required, then tighten both thumb wheels.
3) Attach padded seat (
A
) to seat frame (
C) using 2x thumb wheels (M
), ensuring they are attached
tightly. (
fig. 5
)
Please Note:
Padded seat can be moved forward or backward.
fig. 5
4) Attach padded back rest (
B
) to rear seat frame (
D), using 2x thumb wheels (M
), ensuring they are
attached tightly. (
fig. 6
)
Please Note:
Padded back can be moved upwards or downwards.
fig. 6
