Fixing and Maintenance Instructions
Ver.5 10/2013 (1696)
3
CLEANING
Grab Rails/Grab Bars should be cleaned using a non-abrasive cleaner or mild detergent with
a soft cloth. Only use a mild detergent or disinfectant; never use an abrasive cleaner. Do not
exceed 50
o
C, and never autoclave arm supports. Always ensure that you wipe dry all
equipment and treat joints with a water dispersing agent, e.g. WD40.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for
service support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or
establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt
(Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the
information is given.
Please exercise common sense and do not take any unnecessary risks when using this
product; as the user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the assembly/use of your
product.
