Usage and Maintenance Instructions
Ver. 3 09/2013 (1675)
2
INTRODUCTION
Thank you for deciding to purchase the Toilet Frame from Aidapt. When used
correctly it is designed to give many years of reliable, trouble-free service.
N.B. This equipment must be installed by a competent person.
190 kg (30st.) weight limit.
Do not exceed the weight limit stated
–
doing so could put the user at risk.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments as
this may damage the surface of the product.
Check the product for any visible damage if you see any damage or suspect a fault,
contact your supplier for support.
NB. In this case, please do not use your product as it may compromise your safety.
CLEANING
All of the product components are manufactured from quality materials. However, it
is very important that you only clean your toilet frame using a non-abrasive cleaner
or mild detergent with a soft cloth avoid using lime scale remover. Abrasive cleaners
e.g. AJAX and or abrasive cleaning pads may seriously damage your product beyond
repair.
Do not exceed 50oC when cleaning the armrests as this could permanently damage
the plastic.
N.B. Regular daily cleaning will reduce the build-up of lime scale on your product.
UNDER NO CIRCUMSTANCES, use any abrasive cleaners or materials on any of the
components. Also, check that the cleaner you intend to use is suitable for ABS, Vinyl,
Polymer Plastics and Thermo plastic rubbers and Polyurethane Rubber.
ASSEMBLY
Slide crossbar in place (Fig.5) ensuring locating holes are lined up
correctly (Fig.6)
Insert ‘E’
-clip ensuring it passes through the tube correctly (Fig.7)
Ensure the ‘E’ clip is installed correctly. This is very important. (See
Fig.8 and Fig.9)
Repeat on each side for both cross bars. (Fig. 10)
