9
6. STANDER OPERATION
5. PRELIMINARY CHECKS
After charging the battery these checks should be completed prior to initially
using the stander:
1. Check handset functionality is correct.
2. Check to see that all indicator lights are functioning.
3. Check that the emergency stop button causes the stander to stop.
4. Check emergency lowering function.
5. Check that all leads are inserted, fastened and clear of the rear castors.
Handset
Features:
1. Raise / Lower Function Buttons
Press to move the lifter up and down. Release to stop
movement. Always ensure the environment is free of
obstacles that may impede movement.
2. Leg Spread Function Buttons
Press to open and close the lifter’s legs. Release
to stop movement. This allows you to fit the lifter
around furniture, such as chairs. Always ensure the
environment is free of obstacles that may impede
movement.
3. Battery Charge Indicators
Battery charge indicators will flash when battery
reaches maximum recommended discharge of 18 volts,
while the lifter is under load.
4. Service Indicator
This will illuminate to show that a service is required.
This is usually after 12 months or 8,000 lift cycles -
whichever comes first. You do not have to stop using
your lifter when this illuminates, simply contact your
Aspire dealer to arrange a service.
1
2
3
4
