- Do not touch the hot surface of the ceramic field. Please note: the induction hotplate does
not heat up itself during cooking; it is the temperature of the cookware that heats up the
appliance’s surface!
- Do not heat up any unopened tins on the induction hotplate. A heated tin could explode;
therefore remove the lid beforehand under all circumstances.
OPERATING INSTRUCTIONS
Key instructions
1)The machine has "ON/OFF", "Timing", "Tune up", "Tune down", "Child lock" a total of 5 keys.
2)"ON/OFF" key: used to turn on , turn off the machine. Plug in the power, the buzzer sound,
LED display OFF. Then press ON / OFF, the buzzer sound, into the ON state. Press ON / OFF
in the power on, the buzzer sound, the induction cooker into the OFF state.
3) "Adjust the up, down" key: for temperature, time adjustment.
4) "Timer" key: Used to set the timer off,
5)"Child lock" key: Used to lock the keys on the control panel.
Status description
1) Initialize state: plug in the power, the buzzer sound, while the LED display 88:88, all show
long light 1 second, the digital tube flashes "OFF".
2) Standby state: in the standby mode, press the “ON/OFF”key, the middle of the digital display
"220", and then into the working state of the cooker.
3) Power ON:In the standby mode, press the “ON/OFF”key, the induction cooker automatically
detects the pot or not:
*If there is no pot or pot is not appropriate, the middle of the digital tube flashing two, display
"E0", ring 15 sound (about 30S) if no pot, induction cooker automatically return to shutdown
state;If the pot is put in 30S and the pot is suitable, the induction cooker will start automatically
and enter the corresponding working condition.
*If there is a pot or pot suitable, then successfully enter the working state;
Working status:
In the state of the pot checking, if there is a pot and pot suitable, then enter the corresponding
functional working state;
In the working state, the pot removed, immediately stop the power output, into the pot checking
state;
Shutdown
: In the non-shutdown state, press the key, the buzzer sound 1, into the shutdown
state, digital display "OFF".
Process description
1)Temperature function (manual function):
2) In the standby mode, press the ON / OFF key default to enter the temperature function, the
temperature indicator light, the default temperature of 220
℃
, digital display "220";
3)In the temperature range, press the tune Up/Down key to adjust the temperature, the
minimum adjustable to 60
℃
, the maximum adjustable to 240
℃
, turn to the maximum or
minimum and then press the Up/Down key does not respond, adjust the power And show the
corresponding changes.
4)Up/Down key temperature range:60/80/100/120/140/160/180/200/220/240
℃
5)Press the timer key to set the timer to "00: 00 ~ 03: 00".
Timing instructions
1)In the working state, press the timer key to enter the timer setting state, the digital tube
flashes to display the default timer time "0:00" (three full display), the timer light;
2)In the timer setting state, "minutes: hours" flash together, short press the Up or Down key
each up / down 1 minute, long press the plus or minus key each up / down 10 minutes;
"00 ~ 59" minutes can not be recycled, when the minute to the most 59, or reduced to 00, then
press again to enter the "hour"; hour bit is not adjustable;
3)Timing function can be recycled: two kinds of operation 1, into the timer, the digital display
"0:00", press the Down key, digital display 3:00, continue to press the Down key, only minutes in