Operation
1. To fill water into the kettle, remove it from the power base and
open the lid by press down the lid button, fill with the desired
amount of water to the kettle. Always fill the kettle between the
minimum (0.5L) and maximum (1.7L) marks. Too little water will
result in the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as
water may spill out of the spout when boiling. Ensure that
the lid is firmly in place before connecting the power cord
to the outlet.
2. Close the lid. Position the kettle on the power base in place.
Make sure the kettle contact with the power base completely.
3. Function buttons
3.1Function instruction
This is a full automatic electronic control kettle. It can boil water
to the setting temperature and keep warm. The function buttons
are designed on the handle, include ON/FF button, “SET” button,
“KEEP WARM”button, LED indicating water temperature and
working model, include one ON/OFF indicator light, one keep
warm indicator light, 6 temperature setting light ,such as “40
ć
”
ǃ
“60
ć
”
ǃ
“70
ć
”
ǃ
“80
ć
”
ǃ
“90
ć
”
ǃ
“100
ć
”.Press down the ON/OFF
- 5 -
