manualshive.com logo in svg

AIC SB212-PH, User Manual

Share
Download
AIC SB212-PH User Manual Download Page 57

49

Chapter 4 BIOS Configuration Settings

SB212-PH User's Manual

4�1 Updating BIOS

Important Notes:

To identify the current BIOS version, please check out on BIOS setup.

There are two methods to update the latest BIOS. 
 

1. Update by Messiash Flash utility during POST.

 

2. Update by AMI AFUDOS utility under DOS environment

Update by Messiash Flash utility during POST

1.  Prepare a USB mass storage device.
2.  Put BIOS bin file and mflash.cfg in Root directory.
3.  Plug the USB mass storage device into a USB port of the target computer.
4.  Turn on system.
5.  Boot to BIOS POST screen, you will see hint messages:

Press <S> key to dump system BIOS information.
Press <F> key to update BIOS.
Press <I> key to post system information.
Press <F4> key to open POPUP menu.

6.  Please press <F> key to enter Messiah Flash utility.
7.  Follow the instruction until the message “Update Flash successfully” that had been 

displayed.

8.  Reboot system.

Summary of Contents for SB212-PH







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands