6
Chapter 2. Hardware Setup
SB101-UR User Manual
This section describes a simple instruction guide for installing the hardware components
on the serverboard system. Turn off and unplug all system and peripheral devices before
proceeding.
2�1 Central Processing Unit Setup
The serverboard supports dual Xeon scalable processors and Socket P0 (LGA-3647).
2�1�1 Processor Installation
To ensure a safe and easy setup, you need to prepare before installation:
a T20 Torx screwdriver
ESD wrist strap/mat and conductive foam pad
CAUTION
The pins of the processor socket are vulerable and easily susceptible to damage if fingers or any
foreign objects are pressed against them. Please keep the socket protective cover on when the
processor is not installed.
WARNING
When unpacking a processor, hold the processor only by its edges to avoid touching the contacts.
Procedure:
Installation
Step 1
Push the two locking tabs that secure the processor.
Step 2
Carefully remove the processor from the socket.
Removal
Step 1
Align the gold corner on the processor with the socket.
Step 2
Insert the processor into the socket. Make sure the processor is firmly locked
into the socket.
NOTE
The processor can only be placed in one direction. Handle the processor with care during
installation to avoid damage to the processor.
Chapter 2� Hardware Setup