manualshive.com logo in svg

AIC GB109-PH, User Manual, Page: 58 / 74

Share
Download
AIC GB109-PH User Manual Download Page 58

50

Chapter 4 BIOS Configuration Settings

GB109-PH User's Manual

4�1 Updating BIOS

Important Notes:

To identify the current BIOS version, please check the BIOS setup.

There are two methods to update the latest BIOS. 
 

1. Update by Messiash Flash utility during POST.

 

2. Update by AMI AFUDOS utility under DOS environment

Update by Messiash Flash utility during POST
Step 1

 Prepare a USB mass storage device.

Step 2

 Put the BIOS bin file and mflash.cfg in Root directory.

Step 3

 Plug the USB mass storage device into a USB port of the target computer.

Step 4

 Turn on the system.

Step 5

 Boot the system to the BIOS POST screen, you will see the hint messages:

Press <S> key to find system BIOS information.
Press <F> key to update BIOS.
Press <I> key to post system information.
Press <F4> key to open POPUP menu.

Step 6

 Please press <F> key to enter Messiah Flash utility.

Step 7

 Follow the instruction until the message “Update Flash successfully” is displayed.

Step 8

 Reboot the system.

Summary of Contents for GB109-PH











































































Reviews:

No comments