7
Chapter 2 Hardware Setup
GB109-PH User's Manual
Chapter 2� Hardware Setup
2�1 Central Processing Unit (CPU)
2.1.1 Removing the Processor Heatsink
The heatsink is attached to the server board or processor socket with captive fasteners.
Use a #2 Phillips* screwdriver to loosen the four screws located on the heatsink
corners in a diagonal manner using the following procedure:
Step 1
Using a #2 Phillips* screwdriver, start with screw 1 and loosen it by giving it two
rotations and stop (see letter A).
Step 2
Proceed to screw 2 and loosen it by giving it two rotations and stop (see letter
B). Similarly, loosen screws 3 and 4. Repeat steps A and B by giving each screw
two rotations each time until all screws are loosened.
Step 3
Lift the heatsink upward (see letter C).
REM
OVE
REM
OVE
LGA20
11-3
** SU
PPLIER
IDENT
IFICAT
ION H
ERE **
INSTA
LL PRO
CESSO
R BEF
ORE
REMO
VING
COVE
R
SAVE A
ND RE
PLACE
COVE
R
IF PRO
CESSOR
IS RE
MOVE
D
Processor
Socket
2
3
1
4
A
B
C