17
2.4.2 Installing or Replacing 2.5” Internal SAS/SATA HDD
1.
Release the thumb screw. Pull the bracket holder outward to remove the
bracket from the hooks on the chassis.
2.
Place the 2.5” HDD. There are two pins on each side of the chassis and
bracket holder. Align the 2.5” HDD into the pins.
3.
Tighten the thumb screw.
4. Repeat Steps 1 through 4 to install the rest of HDDs.
17
2.4.2 Installing or Replacing 2.5” Internal SAS/SATA HDD
1.
Release the thumb screw. Pull the bracket holder outward to remove the
bracket from the hooks on the chassis.
2.
Place the 2.5” HDD. There are two pins on each side of the chassis and
bracket holder. Align the 2.5” HDD into the pins.
3.
Tighten the thumb screw.
4. Repeat Steps 1 through 4 to install the rest of HDDs.
