manualshive.com logo in svg

AIC 12G SAS JBOD Series, User Manual

Share
Download
AIC 12G SAS JBOD Series User Manual Download Page 83

74

Chapter 4. BMC Configuration Settings

J4060-03 User Manual

Domain Name Server 

It contains a database of the public addresses and their associated 

hostnames.

DNS Server Settings 

It lists the options for the DNS interface, Manual and available LAN 

interfaces.

IP Priority 

If the IP Priority is IPv4, it will have 2 IPv4 DNS servers and 1 IPv6 DNS server. If 

the IP Priority is IPv6, it will have 2 IPv6 DNS servers and 1 IPv4 DNS server.

NOTE

This is not appicable for manual configuration.

DNS Server 1, 2 & 3

Specify the DNS (Domain Name System) server address to be configured for the BMC.
• An IPv4 Address is made of 4 numbers separated by dots as in 
“xxx.xxx.xxx.xxx”.
• Each number ranges from 0 to 255.
• The first number must not be 0.
DNS Server Address will support the following:
• IPv4 Address format.
• IPv6 Address format.

Save

Click ‘Save’ to save any changes made. You will be logged out of current UI session and will 
need to log back in.

Reset

Reset the modified changes.

Summary of Contents for 12G SAS JBOD Series

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands