• Operation & Battery Insertion
Receiver
Hand-held Microphone
Insert the DC Plug of AC Adaptor in to the receiver.
Insert a 9V battery in the battery compartment of
Insert AC Adaptor into the socket of AC mains
the hand-held microphone by unscrewing the lower
supply.
part of the microphone body.
Insert one end of connecting cable to Audio Output
socket of Receiver and other end of the cable to
Ensure the 9V battery is inserted with correct
the Mic input of an amplifier.
polarity.
The microphone has a 3-position slide switch:
In top position, the microphone is ON and Red LED
glows.
Ensure both the telescopic
antennas are fully extended
vertically.
The centre of the switch is 'Standby' or 'Audio
Mute'. In this position Red LED will glow, RF
Carrier frequency will be transmitted, but 'Audio'
Switch ON the Power Switch of
will be muted.
the Receiver. Red LED on front
panel will glow.
When the switch is at the lowest position, the
microphone will be completely switched off.
Always keep the receiver antennas away from
metal and other reflecting surfaces and
obstructions.
To AC mains
To DC Socket
of Receiver
12
To Audio Output
of the Receiver
To Mic Input
of an Amplifier
9
ON
ON
ON
OFF
OFF
OFF
Top Position
Centre Position
Lowest Position
Frequency
Sticker
Unscrew
to open
9V
Battery
Battery
