11
© 2017 • Advanced Healthcare Technology Ltd. • Baby Pod 20 ®
Section 5
Safety inspection of Baby Pod 20 cont...
Section 5.3 - Re-assembly of Baby Pod 20 cont...
Pass each Infant Positioning Strap through it’s corresponding slot in the Vacuum Mattress. There are
two available slots for each strap to cater for larger or smaller patients.
Insert the “Side” foam panels, being sure to locate the end of each into the recesses in both the
“Head” and the “Foot” sections already in place. When foam is properly located, secure “Side” foam to
the Baby Pod 20 interior via the “popper” located on the back (blue) side of each “Side” section.
Insert the “Base” foam section into the bottom of the Baby Pod, making sure to keep the 4 Infant
Positioning Straps Accessible. On top of this, place Vacuum Mattress with the vacuum port at the
Foot end of Baby Pod 20 with the valve facing up. The valve should be in the open position (tubing
sections fully engaged with the black “O” ring hidden from view) to allow air to enter the mattress.
Spread the polystyrene bead contents of the mattress evenly by hand.
