ahlmann AS 90tele, Operating Instructions Manual, Page: 65 / 103

T90C/T90D 8-6
8 Maintenance
1 2
1 2 3 1 4
2 1
Figure 8-10
Figure 8-12
Figure 8-11
(3) Replace the plugs for the axle arch (8-9/1 and 8-9/2)
and the intermediate gear (8-10/2).
(4) Fill oil into the plug bore of the axle arch (8-9/3) and
the intermediate gear (8-10/1) until the oil level reaches
the opening (8-9/4 or 8-10/1).
NOTE
- The axle arch and the intermediate gear do not have
a common oil reservoir.
- Information about the quantity of oil is given in the
maintenance plan (chapter 8.4).
- After a few minutes, when the oil level has lowered,
top up the oil until the oil level reaches the marked
level and remains stable.
(5) Replace the plugs for the axle arch (8-9/3 and 8-9/4)
and the intermediate gear (8-10/1).
8.2.5.2 Rear axle » fast loader «
(1) Place a sufficiently large oil drain pan underneath.
(2) Remove the plugs from the axle arch (8-11/1, 8-11/2,
8-11/3 and 8-11/4) and the distribution gear (8-12/1 and
8-12/2) and drain the oil.
CAUTION
Waste oil must be disposed of in such a way that it will not
cause pollution!
(3) Replace the plugs for the axle arch (8-11/1 and
8-11/2) and the distribution gear (8-12/2).
(4) Fill in oil via the plug hole in the axle arch (8-11/3) and
the distribution gear (8-12/1) until the oil reaches the
opening (8-11/4 or 8-12/1).
NOTE
- The axle arch and the intermediate gear do not have a
common oil reservoir.
- Information about the quantity of oil is given in the
maintenance plan (chapter 8.4).
- After a few minutes, when the oil level has lowered,
top up the oil until the oil level reaches the marked
level and remains stable.
(5) Replace the plugs for the axle arch (8-11/3 and
8-11/4) and the intermediate gear (8-12/1).