ahlmann AS 90tele, Operating Instructions Manual, Page: 51 / 103

T90C/T90D 6-5
Attachments 6
1
2
Figure 6-9
(6) Shut down the engine.
(7) Depressurise the hydraulic lines by moving the hand
lever for the auxiliary hydraulics (4-10/2) to and fro.
(8) Pull off the protective caps from the hoses of the
quick-change device (6-9/1).
(9) Swing up the protective flaps of the quick-change
couplings on the multi-purpose bucket (6-9/2) and connect
them with the hoses of the quick-change device (6-9) by
tightly pushing them in.
CAUTION
When making connections, make sure that the hydraulic
connections are clean and completely connected.
Dismounting
(1) Place the multi-purpose bucket on the ground in a
stable position and protect it from toppling over if necessary
to prevent the risk of injury.
(2) Shut down the engine.
(3) Depressurise the hydraulic lines by moving the hand
lever for the auxiliary hydraulics (4-10/2) to and fro.
(4) Dismounting takes place in the reverse order of
mounting. However, to unlock the multi-purpose bucket,
the release button for the quick-change device (4-11/2)
must be used.
NOTE
The type plate is on the rear of the bucket, on the right-
hand side beneath the cross arm.
Notes on the application of the multi-purpose
bucket
The multi-purpose bucket can be used for:
- peeling (6-10)
- scraping (6-11)
Figure 6-10
Figure 6-11