11. Trouble-shooting
23
Test only the receive line by pressing the
START / STOP
key.
Error
Data transmission in the network does not function.
Remedy
Check to ensure that all devices are set to different addresses.
Address all devices individually via the terminal with command ´
Gxy
´.
Addressed device is OK if at least ´
y CR
LF
´ is returned as echo.
If transmission is still not possible, unplug the networked devices.
Check all devices individually on the data cable to the computer; (see above).
Check the wiring for short-circuit or crossed wires.
Are all network distributors supplied with power ?
Network the devices again one at a time and check successively; (see above).
If, after performing the above-listed checks and remedial steps, the device still fails to
behave as described in the operating instructions, it must be returned to our factory in
Holzkirchen, accompanied by an explanatory note, error description, and if available test
printouts. With the AMR-Control software you can print out screen-shots with the relevant
programming and save and / or print out a comprehensive ´Function test´ in the device
list or terminal operation.
Summary of Contents for ALMEMO 8590-9
Page 24: ...24 12 DECLARATION OF CONFORMITY...
