9. Menu selection
9. MENU SELECTION
Via menu selection (see 8.1) it is also possible to select
3
measuring menus
1.
M Sensor display
see 10.1
2.
M Measuring points list
see 10.4
3.
M U1 Data logger
see 10.5, 10.6 plus
4.
F Function menus
see 11
and
3 programming menus
:
5.
P Sensor programming
see 12
6.
P Device configuration
see 13
7.
P Output modules
see 14
(if available)
To obtain the most important device data press
key(s) :
INFO
Here, if you have any questions, you can find the
exact device type together with its firmware ver-
sion, options, and serial number. Here, you can
select any sensor by pressing key(s)
▲
/
▼
and identify it on the basis of its order number (if
available). To determine the power supply re-
quirements both the battery voltage and the sen-
sor voltage can be called up. You can also obtain help at our WEB address.
10. MEASURING MENUS
In addition to the universal
sensor display
(see below) the
measuring points
list menu
(see 10.4) also offers a useful overview of all measuring channels in
combination with the most important data. Each measuring menu can, by
means of function menus, be assigned various functions; (see 11). If these
preconfigured menus do not completely meet your requirements, you can as-
semble your own user menu U1 from a range of over 50 functions; (see 10.6).
10.1 Menu Sensor display
When the device is switched on for the first time
it opens with the intelligent menu
Sensor dis-
play
. The first line shows the measuring point,
measured value, and units - in upper-case for-
mat. Below this, depending on the measuring
range, it lists all functions of importance for this
measured value, plus any further measuring
channels assigned to the connector in question.
Symbols indicate the status of the measured value; (see 8.2).
Additional measuring functions are provided via function menus; (see 11).
Symbol
<M>
in the middle of the row of softkeys indicates that the measuring
point can be selected by pressing keys ▲ and ▼.
22 ALMEMO
®
2590
13: 25.45
m/s
L840 flow º
Temp comp
45.7 °C
Atm pressure 1027 mbar
03: 21.67 Pa dyn pressure
MENU M ©©F FCT
ALMEMO 2590-3S
A2590-3S 6.12 Option R
Serial no. 12345607
Sensor no. 0: FHA646-2
UBat: 4.1 V Us: 9.1 V
www.ahlborn.com
Mªª MENU M
M* sensor display ©
M Measuring points list
M U1 Data logger
F Function menus FCT
P Sensor programming
P Device configuration
P Output modules
INFO Mªª F © *ON
Summary of Contents for ALMEMO 2590-2
Page 74: ...17 Appendix 17 4 Your contact 74 ALMEMO 2590...
Page 75: ...Your contact ALMEMO 2590 75...
Page 76: ...17 Appendix 76 ALMEMO 2590...
