Ahlborn ALMEMO 2390-3, Operating Instructions Manual, Page: 15 / 24

6. SENSOR PROGRAMMING
Since on ALMEMO
®
devices all sensor programming is stored in the ALME-
MO
®
connector, you can connect any ALMEMO
®
sensor without needing to re-
program. To connect certain sensors you can even order ALMEMO
®
connec-
tors that have already been appropriately programmed. If, however, you wish
to create or scale your own sensors or if sensor errors have to be continually
corrected, you can do the programming via the serial interface using the AMR-
Control software; (see Manual, Section 6.3).
6.1 Measuring ranges
With each channel switchover or sensor breakage the abbreviation for the
measuring range appears in the display. The following table lists all possible
measuring ranges for identification purposes.
Sensors Sensor/connector Meas. range Units Display
Pt100-1 FP Axxx -200.0... +850.0
°C P104
Pt100-2 FP Axxx -200.00...+300.00
°C P204
Ni100
ZA 9030-FS3
-60.0... +240.0
°C N104
NiCr-Ni (K) FT Axxx -200.0...+1370.0
°C NiCr
NiCroSil-NiSil (N) ZA 9020-FSN -200.0...+1300.0
°C NiSi
Fe-CuNi (L) ZA 9000-FSL -200.0... +900.0
°C FECO
Fe-CuNi (J) ZA 9000-FSJ -200.0...+1000.0
°C IrCo
Cu-CuNi (U) ZA 9000-FSU -200.0... +600.0
°C CUCO
Cu-CuNi (T) ZA 9000-FST -200.0... +400.0
°C CoCo
PtRh10-Pt (S) FS Axxx 0.0...+1760.0
°C Pt10
PtRh13-Pt (R) ZA 9000-FSR 0.0...+1760.0
°C Pt13
PtRh30-PtRh6 (B) ZA 9000-FSB +400.0...+1800.0
°C EL18
Au-FeCr ZA 9000-FSA -270.0... +60.0
°C AUFE
Ntc type N FN Axxx -30.00...+125.00
°C Ntc
Millivolt ZA 9000-FS0 -10.000...+55.000
mV U 55
Millivolt 1 ZA 9000-FS1 -26.000...+26.000
mV U 26
Millivolt 2 ZA 9000-FS2 -260.0...+260.0
mV U260
Volt ZA 9000-FS3 -2.0000...+2.6000
V U2.60
Difference millivolt ZA 9050-FS0 -10.000...+55.000
mV d 55
Difference millivolt 1 ZA 9050-FS1 -26.000...+26.000
mV d 26
Difference millivolt 2 ZA 9050-FS2 -260.0...+260.0
mV d260
Difference volt ZA 9050-FS3 -2.0000...+2.6000
V d2.60
Sensor voltage any 0.00...20.00
V UbAt
Milliampere ZA 9601-FS1 -26.000...+26.000
mA I032
Percent (4-20mA) ZA 9601-FS2 0.00... 100.00
% P420
Ohms ZA 9003-FS 0.0... 500.0
Ω
Ohn
Frequency ZA 9909-AK1 0... 32000
Hz FrEq
Impulse ZA 9909-AK2 0... 65000
PULS
Digital input ZA 9000-EK2 0.0... 100.0
% Inp
ALMEMO

2390-3 15
Sensor programming