8
©
2016
AheadX
保留所有权利。
After installation, run the console software. The main interface is shown as follows:
Status settings instruction:
Engine:
Click to make Fixed-wing engine damaged (only for oil motor), reopen the model to
escape from the damage(for fixed-wing and quad-plane).
Gps positioning:
Click to make GPS signal miss, click again to be OK.
Rudder surface:
Click to make rudder surface fail, click again to be OK (for fixed-wing and quad-
plane).
Motor:
Write the motor number and click to make the motor damaged, click again to be OK (for
multi-rotor and quad-plane).
Ensure that the device is properly connected and powered on, then click the
ON
button (at the
right of ‘XPlane’) to open the XPlane software (ensure that the XPlane optical drive file has been
loaded). After the software is running normally, click the blue button (on the left top) to connect
XPlane. Search and choose the matching port name to COM5 in the upper right corner. Then click the
button under it to connect the hardware device. With successful connection, the window is shown as
follows:
Connect Xplane
Connect Ashil
Open Xplane