SOLUTIONS
|
+49 2173 -164-0
| FREE FAX 0800 / 2 42 32 93 |
|
WWW.AHB-SHOP.COM
4
USER MANUAL
Alarm steering wheel lock with remote control
Please check following details after opening this package:
1. Steering wheel lock with alarm: 1 pc.
2. Key for steering wheel lock: 2 pcs.
3. 9 volts alkaline battery: 2 pcs.
4. Remote control: 1 pc.
HOW TO LOCK ON THE STEERING WHEEL
Please press “POWER ON” button on the steering
wheel lock to switch the device on. Pull the front
part of the lock to open and put it into place on the
steering wheel.
Push the front part to close the lock.
Keep Pushing the front part until the lock snaps into
place.
Press the “LOCK” button on the remote control to
activate the alarm
To open: Please Press “UNLOCK” button on the
remote control to disarm the alarm, proceed with
using the key to unlock the steering wheel lock.
The front part will eject out itself, you can now
remove the steering wheel lock.
HOW TO SET THE ALARM WITH THE REMOTE CONTROL
1. Reading in a new remote control
Press the “POWER ON” button on the steering wheel lock,
after the device is switched on, press the “POWER ON” button twice, a warning tone will
sound once. The LED light will be turned on, please start to read in the remote control by press-
ing the “LOCK” button on the remote control once, a warning tone will sound once along with
a single LED flash, this means the remote control was successfully read in.
Note: Each lock can read in 5 remote controls.
2. Powering on the steering wheel lock
Press the “POWER ON” button on the steering wheel lock to active the device, a warning tone
will sound twice, you can now use the remote control to set the lock to alarm condition.
