+49 2173 -164-0 | [email protected]
10
11
WWW.AHB-SHOP.COM
SOL
UT
IONS
SOL
UT
IONS
INSTRUCTION MANUAL
INSTRUCTION MANUAL
Power-on test:
connect the input power supply and the backlight is on;
the clamp is not connected, the clamp is positive, but the
terminal voltage of the clamp is lower than 0.5V, and the
clamp is flashing.
Reverse connect detection:
when the clamp is reverse connected, the reverse connect
symbol flashes.
Wrong connect detection:
the voltage at both ends of the clip is higher than 0.5V, after
selecting, the voltage gear according to the gear selection
key, waiting for 5S, when the positive voltage of the clip
is greater than 7.8V (6V mode),15.6V (12V mode), the clip
symbol flashes.
Bad battery detection:
charge the 6V battery, if the voltage is less than 5.5V ±0.2v
in 4 minutes or the current does not reach 1A after 2 hours
of high voltage de-vulcanization, the bad battery symbol
flashes. Charge the 12V battery, if the voltage is less than 11V
±0.2v in 4 minutes or the current does not reach 2A after
2 hours of high voltage de-vulcanization, the bad battery
symbol flashes.
High voltage de-vulcanization:
6 V: before charging, the voltage is less than 6.2 V and filled
within 5 minutes, into high voltage de-vulcanization, 7.9V
high voltage charging. When the current is greater than 1A,
charge normally.
12V: before charging, the voltage is less than 12.4V and filled
within 5 minutes, into high voltage de-vulcanization, at 15.8V
high voltage charging. When the current is greater than 2A,
charge normally.
Constant current charging:
Full charge detection:
6VSTD, voltage 7.2 ±0.2v, current 0.6±0.3a, stop charge, the
Lcd screen show “FUL”
6VSTDSNOW, voltage 7.4±0.2v, current 0.6±0.3a, stop charge,
the lcd screen show “FUL”
12VSTD, voltage 14.4±0.2v, current 0.6±0.3a, stop charge, the
lcd screen show “FUL”
12VSTDSNOW, voltage 14.9±0.2v, current 0.6±0.3a, stop
charge, the lcd screen show “FUL”
12VAGM, voltage 14.7±0.2, current 0.6±0.3a, stop charge, the
lcd screen show “FUL”
12VAGMSNOW, voltage 15.2±0.2v, current 0.6±0.3a, stop
charge, the lcd screen show “FUL”
Battery voltage
6V-6.8V
6.8V-7V
Above 7V
6V mode
2A
1.5A
Lower than 1A
Battery voltage
12V—13.6V
13.6V—14V
Above 14V
12V mode
4A
3A
Lower than 2A
