Explanation of connection terminal (upper part)
1) Input USB for latop or other external device (TABLET
sensing) / RGB(VGA) for video (gently pull the cables out,
after usage push them back into the Simpo)
2) AC OUTLET(power for outer apparatus, same voltage as
main input voltage)
3) Main power switch (when power is ON, switch will light)
4) Input video signal (input for composite audio and video)
5) USB (when connecting to outer apparatus’ sensor, for
example connecting to an IWB)
6) LAN Output (supply your external device with internet or a
network connection)
7) Voice input(Laptop headphone)
8) Voice output(Laptop MIC)
9) Volume
10) Body height adjustment switch (
maximum height of 150mm)
11) Monitor angle adjustment switch (
remember to fully
decline the monitor when finished with the unit. The
monitor should be down fully when closing the Simpo’s
sliding cover.)
12) Input selection switch for PC and LAPTOP. PC will display
the contents of the Simpo’s main computer and Laptop will
display the contents of an external device
4
1
2
3
4
9
12
11
10
7
6
5
8
Attention! When adjusting body height, ensure that you
do not lean or place extra weight onto the Simpo. This
will cause strain on the electric motor and cause it to
wear out prematurely.
