symptom
Fault diagnosis
remark
No power on
check for any problems in the power cord.
check that the power switch is on.
check that the socket is on.
check fuse was imbedded in power cord socket.
Not recording
with computer
check that PC AUDIO IN/OUT are connected properly.
check that the input device cable was connected properly.
check that the computer’s volume level was not set too low.
check conversion switch of PC / LAPTOP.
Microphone
does not work
check mic for gooseneck (3PIN)
check the status of the connection cable.
No sound
check that the volume adjustment was not set at minimum
check that the in/out put ports are connected properly.
when operating with a Laptop, the PC audio will not be output.
If encountering a problem with the Simpo, take a look at the list of most common
resolutions below. Before requesting repair, make sure your problems aren’t caused by any of
these errors.
! ATTENTION ! : Do not disassemble this product. There is a high risk of electrical shock.
Fault diagnosis
Fault diagnosis
12
