10
ENGLISH
SHARE GT
INSTRUCTIONS FOR ASSEMBLY ON AGV GT Veloce
Components of the communication system supplied:
-
Communication system
-
Keypad unit / shape adaptor
-
Speaker fastening Velcro pads
-
Case fastening Velcro pads (male and female)
-
Cable fastening adhesive
-
Battery charger
-
USB cable
-
AUX-IN Cable
-
Current adaptors
To fit the Share GT Kit to your helmet proceed as follows:
1. Place the helmet upside down on a soft surface, making sure that it is in a stable position (Figure
1).
2.
Pull the chinstrap towards you, and remove the foam cheek pads and the cap padding.
Under no circumstances try to remove the cheek EPS parts. Under no circumstances try to remove
the chinguard.
