DNP16-01
MANUAL FOR INSTALLATION AND USE
By: E. Irazu.
Reviewed by: J. Fernández
DNP16-01. PIVOTING BUFFER SUPPORT
BRAND PRODUCT
DEPARTMENT
3
Rev:2
4)
TASKS PRIOR TO ASSEMBLY:
Use the assembly diagram to identify the location of the buffer support and perform the following checks:
Tasks prior to assembly:
Check Depth X of the buffer support and cross check against the project design.
Check the type of buffer ensuring that it is compatible with the buffer support.
Check type of wall fixture. There are three possible situations:
-
Direct:
The buffer support is mounted directly onto the wall.
-
With chocks:
When the distance to the wall is between 5-30 (5 mm intervals)
-With L fixtures:
When the distance to the wall is between 35-80 (5 mm intervals)
Check that the area for fixing the buffer support to the wall/structure is clear and suitable for the
required fixture.
(NB: The necessary wall plugs are not provided and must be appropriate or the type of wall. The tensile
load on each fixture point is 75 kg).
5)
MOUNTING THE BUFFER SUPPORT:
The first step is to assemble the
shaft
- provided disassembled in the box - and place the
plate
in a horizontal
position.
Shaft
Plate
