4
INSTALLATION STEPS
Drill the long screw (3) through the normal
wall bracket (1)
Screw down the long screw (3) to firmly
connect the normal wall bracket (1) to
the vertical bar. Note that the set screw
on the wall bracket should towards the floor
when the unit is installed.
Use tape to measure the distance between
these four holes, and the data AB, AC, CD
and BD
Mark A, B, C, D according to the distance.
We strongly suggest it is installed at least
600mm above the floor level.
Try to install the towel warmer and
use the leveling instrument to test
the levelness and perpendicularity.
01
02
03
04
