Installation & Operation Manual Merlin GDP2X
AGSGDP2X - IOM Iss: 3 03-20
4
Fixing
Unpack all the parts!
1.
Carefully remove the front cover and board from
the unit by unscrewing the four bolts located at
each corner.
To do this – use the socket wrench provided.
2.
Mark the four screw holes located on the back of
the enclosure to the wall. Ensure the wall surface is
flat to prevent base distortion.
3.
After executing the mounting and the connections – replace the front cover and insert the
security caps over the four bolts.
Board Overview - Main
Be careful when creating access for cables – Damage to boards will void any warranty.
To avoid electrical shock you must
always isolate the mains supply before
opening the GDP2X panel cover/s.
