Installation & Operation Manual Merlin GDP2X
AGSGDP2X - IOM Iss: 3 03-20
13
Servicing & General Maintenance
On the gas detector - a service message will intermittently flash every 30 seconds after one year
of operation. The detector will still operate as intended but contact your supplier immediately.
When Merlin gas detector(s) display the service message – the GDP2X panel will show [
SERVICE
]
on the status screen.
The GDP2X will still operate as intended and if any dangerous gas levels are detected, your
GDP2X will show the detector ID in alarm in the top left hand corner.
DO carefully remove any accumulated dust from the outer enclosure once a month.
NEVER use detergents or solvents to clean your detectors – this may permenantly or
temporarily damage the gas sensing elements.
NEVER spray lighter gas, paint or other aerosols near the detectors.
NEVER paint the device. Paint will seal vents and may interfere with the device.
It is recommended that detectors are inspected and serviced at least annually from the
date of installation for optimum performance and protection.
Avoid exposure of high concentrations of alcohol found in many products, this can damage,
deteriorate or affect the gas detectors. For more information refer to your detector manual.