INSTRUCTIONS FOR USE
AGT 850 / 860
70
DETENT
DETENT
Version B (NT70)
Control lever has four positions:
Position "1" – supply of oil under pressure, control lever returns to neutral position automatically
Position "0" – neutral position
Position "2" – supply of oil under pressure, control lever returns to neutral position automatically
Position "4" – oil discharge (float position), control lever is fixed (detent) – required manual
shifting to neutral position
4.7.4
POSITIONING OF CONTROL VALVES
Control element with three control levers has the following control valves installed:
levers 1 and 2 regulate two two-way functioning 6/3-
directional control valves for control of implements
with two-way functioning hydraulic cylinder
lever 3 regulates one two-way functioning 6/4-
directional control valve version A for control of
implements with two-way functioning hydraulic
cylinder
Control element with four control levers has the following
control valves installed:
levers 1 and 2 regulate two two-way functioning 6/3-directional control valves, one for control of
implement with two-way functioning cylinder and one for control of two-way hydraulic cylinder
for control of lower connection arms
lever 3 controls one one-way functioning 5/3-directional control valve for control of implements
with one-way hydraulic cylinder (standard for connection and control of front hydraulic lift
mechanism)
IMPORTANT: When you are not using control valves, control levers must
always be in neutral position.
6
/3
-direct
io
na
l c
o
ntr
o
l
v
a
lv
e
6
/3
-direct
io
na
l c
o
ntr
o
l
v
a
lv
e
6
/4
-direct
io
na
l c
o
ntr
o
l
v
a
lv
e
