INSTRUCTIONS FOR USE
AGT 850 / 860
33
E) Work lights
Lights can be manually adjusted under different angles for
optimal lighting of certain area.
F) Rear-view mirrors
Set rear-view mirrors accordingly for safe control of the tractor
and implement during driving.
Rear-view mirrors are set correctly, when the driver see sides of
the tractor and implement without trouble.
Rear-view mirror setting:
Horizontal setting
To set the mirror horizontally, unscrew bolt (1) on holder,
then move the mirror on the bar (2) left or right, until you
set desired position. When the setting is done, tighten the
bolt on the holder.
Mirror bar also enables turning around the axle. You can
turn them completely in or out in case of tight space. With
each move, bars lock into certain intermediate position.
Setting mirror for defined angle
Because the mirror is fixed in the centre of the holder, the
mirror can be set at will at different angles (option of
turning for 360°, forward or backward, left or right).
G) Rotation light (option)
Rotation light is used on tractor with tractor implements
exceeding tractor width or on tractors with carried tractor
implements, rear edge of which reaches more than 1.5 m over
the rear edge of the tractor.
In this case, an additional warning light is used, which is
installed on the rear part of the implement.
1
2
