INSTRUCTIONS FOR USE
AGS 1800 - 2000 EN-HV (HVB)
Rev.9/2018
40
Figure 7.11
The valve flow direction is marked with an arrow on the lever of the valve. Proper adjustment of the
spraying valves is shown in Figure 7.11. Turn the three-way valve for excess liquid (4 – Figure 4.5) so
that the excess spray is directed back into the main tank (Figure 7.12).
Figure 7.12
For a description of opening of individual spraying sections, see the chapter
Napaka! Vira
sklicevanja ni bilo mogoče najti.
.
7.10.2
COMPLETE CLEANING OF THE SPRAYER
Complete cleaning of the sprayer includes the cleaning of all interior parts of the sprayer, consisting of
the main reservoir (1 – Figure 4.5), filter (6 – Figure 4.5), pump (3 – Figure 4.5), regulator (7 – Figure
4.5) and the nozzles (10 – Figure 4.5). With the drain valve on the additional reservoir (12 – Figure
4.5) direct clean water towards the suction valve (14 – Figure 4.5), which you have adjusted to pump
clean water from the additional reservoir. Open the selector valves on the regulator (24 – Figure 4.5) to
activate the reservoir cleaners (11 – Figure 4.5).
