Agrofortel YZ-112, Operation Manual, Page: 26 / 72

10.
Hatching (The begining)
10.1. Check the incubator from outside
10.2. Connect the power cord from the egg holders
to the
connector
10.3. Put the egg holders back to it’s place
10.4. Fill the chanel with water (with included bottle)
(see chapter 11)
10.5. Put the eggs into the holders with the pointy
end
down
10.6. Close the incubator
10.7. Press the RESET button to initiate the motor
to rotate and reset the day counter
10.8. Set the temperature, see chapter 2
10.9. Next, just check the humidity and water status
of the channels
10.10. 18th day of hatching disconnect the power
cord from the connector from the egg holder,
remove the holder, and place the eggs on the
floor of the hatchery
10.11. Don!t forget to keep higher humidity and
lower temperature (see chapter 12)
10.12. Do not open the hatchery if it’s not
necessary.
10.13. Refill the water with the hole on the rear
side