manualshive.com logo in svg

Agrison ME8000, Operating Manual

The Agrison ME8000 Operating Manual is a comprehensive guide that enables users to maximize their experience with this powerful product. This detailed manual is available for free download on our website, allowing customers to conveniently access it whenever needed. Enhance your knowledge and understanding of the Agrison ME8000 through our comprehensive manual.

Share
Download
background image

 

 

2

INDEX 

I.MACHINE DESCRIPTION AND TECHNICAL DATA 

  Machine description, technical data…………………………………………………….1 

Ⅱ

.SAFETY INFORMATION 

  General safety information……………………………………………………………….5 
  Crushing and burn prevention……………………………………………………………6 
    Fire and explosion prevention……………………………………………………………7   
  Machine start up safety……………………………………………………………..……8 
  Machine operating safety………………………………………………………….….….8 
  Machine parking safety……………………………………………………………….….10 
  Machine transportation safety……………………………………………………………10 
  Machine towing safety…………………………………………………………….….….11 
  Machine maintenance safety……………………………………………………………..11 
  Hydraulic pipeline…………………………………………… …………………………12 
    Additional safety guideline for cabin……………………… …………………………...13 
    Signs on the hydraulic excavator…………………………… …………………………..13 

Ⅲ

.OPERATION AND CONTROL 

Parts position……………………………………………………………………………...15 
Cab………………………………………………………………………………………...16 
Instrument panel …………………………… …………………………………… ……...21 
Keyset ………………………………………………………………… ………… ….…..24 
AC system …………………………………………………………………………………26 
Sound system ………………………………………………………………………….…..28 
Seat adjustment …………………………………………………………………………….29 
Front window ………………………………………………………………………….…..30 
Grinding-in new machine …………………………………………………………………..32 
Starting and stopping …………………………………………………… …………….…..33 
Walking …………………………………………………………………… ……………...44 
Operating instructions ……………………………………………………………………...50 
 

Ⅳ

.LUBRICATION

 

General safety information………………………………………………………………….59 
Lubricant and fuel specifications……………………………………………………………60 
Checking coolant level………………………………………………………………………61 
Changing oil in travel gear…………………………………………………………………...62 
Lubrication of the swing ring teeth……………………………………………………….…63 
Lubrication of attachment bearing points……………………………………………………63 
To drain and add oil to the hydraulic tank……………………… …………………………..64   

Ⅴ

.MAINTENANCE 

https://tractormanualz.com

Summary of Contents for ME8000




















































































Reviews:

No comments

Related manuals for ME8000

SANY SY50U Operation And Maintenance Manual preview
SY50U
Brand: SANY Pages: 228
achilles KOOP A13S Owner'S Handbook Manual preview
KOOP A13S
Brand: achilles Pages: 28
TATU PCA PLUS Operator'S Manual preview
PCA PLUS
Brand: TATU Pages: 130
FlexLink 5995512 User Manual preview
5995512
Brand: FlexLink Pages: 74

Brands by name

Popular brands

Load more brands