8
For blade cutting attachment
1 Match the hole in the side of the cutting
attachment guard with the hole in the side
of the fear box.
2 Screw the cutting blade securely.
3 Mount the shaft nut on the blade cutting
attachment head.
4 Remove the blade cutting attachment
tightening nut and cup washer from gear
box.
5 Insert the upper clamp and lower clamp
into the gear box.
6 Then insert the hexagon wrench in the
holes to stop moving the clamp.
7 Tighten the blade cutting head counterclockwise with hand into the gear box.
5 Shoulder belt
Adjust the strap length so that the cutter blade
will be kept parallel with the ground.
In an emergency, pull the release belt Strongly
upward, and you can detach the machine from
you. Be extremely cautions maintain control
of the machine at this time. Do not allow the
machine to be deflected toward you or anyone
in the work vicinity.
EXAMPLE OF FUEL-MIXING (50:1)
2 stroke oil (grade: JASO-FC)
Gasoline 2 stroke oil WARNING
1 Use a container mix gasoline with 2 stroke engine oil. Do not mix
them in the fuel tank directly. Wipe off split fuel immediately.
2 Do not use old mixed fuel because it has deteriorated and
adversely affect the engine.
3 Do not smoke during fuel mixing fuels.
1L
20 CC
4L
80 CC
5L
100 CC
10L
200 CC
