agrifac PYTHON, Manual

Page: 25 / 55

Drain cleaner
17
8. Options
Shaft systems
For cleaning of drains that discharge into shafts, additional attachments are available.
There are 2 models:
•
Shaft system for 30 cm No. 9821007.0
•
Shaft system for 40 to 60 cm No. 9821008.0
With this system the hose can be bend sharply to be inserted in the drain.
Arm extension
As an option an extension of 2 m can be supplied. This extension can be mounted
between the side arm and the guide arch, so that in special cases you can stay further
away from the ditch. When the ditch is very deep, the extension can also be placed
between the two arches.
•
Arm extension No. 9820217.0
•
Locking bolt No. 9820134.0
Telescope system
With this option the guide arch can be telescoped out through a hydraulic cylinder with
regard to the side arm. The telescope cylinder is operated with the middle lever of the
standard triple control block. With this telescope cylinder it will be easier to place the guide
arm in front of the drain.
•
Telescope system No. 9821006.0
Electro-hydraulic remote control
The hydraulic functions can also be commanded electrically. The functions are then
operated with 3 switches on a box with a 10-meter cable. This box can also be mounted in
the cabin, so that the machine can be operated from the tractor. Because of this 10-meter
cable it is also possible to operate the machine when you are standing on the side of a
ditch near the drainpipe.
•
Electro-hydraulic remote control No. 9821010.0
Independent hydraulic pack
The drain cleaner can be equipped with an independent hydraulic pack. In that case the
machine does not use the tractor hydraulics. The hydraulic pump is placed directly behind
the water pump and does not need a separate drive this way. De hydraulic tank is
mounted on the back of the frame. The oil level of the tank must be checked regularly
through the sight glass and the return filter must be replaced when it is dirty. The number
of revolutions of the drive shaft may be 300 rev/min at the most, or the hydraulic pump
will be overloaded.
•
Independent hydraulic pack No. 9821011.0